Categories
Bike Touring

Central Otago Biking

The next stage for our summer trip was Central Otago. From the West Coast we had a long day of driving via the Haast Pass. Luckily this was the only day of serious rain for our whole trip. There’s a lot of isolated, rugged terrain down the West Coast, dense bush, and steep mountains. Cross over the alps, and suddenly the terrain becomes a lot drier, and opens right out.

We established a base camp in Ranfurly, right on the Otago Rail Trail. This gave us easy access to the Rail Trail, with Naseby Forest nearby for mountain biking. The Otago Rail Trail was the first multi-day off-road cycle trail established in New Zealand, and it has become a combination blueprint/showpiece for the other trails that want to establish themselves. I had ridden part of it a few years ago, and was looking forward to getting on the trail again.

Getting settled into our cabin at the Ranfurly Motor Camp, we saw that our neighbours were on bikes too. Their bikes were left unlocked outside their cabin, and they appeared to have passed out on their bed, still in their biking gear. Later we saw that him carrying her around the campground, too tired to walk. Hmmm…it’s just not that hard a trail, what’s going on? They’d only ridden around 35km that day, but it seemed the headwind and slight uphill gradient had gotten to them. It’s a very easy trail, and very accessible to a wide range of fitness levels – I have to assume that she was unwell – most non-cyclists will have no trouble riding 35km a day, especially if you’ve got 8+ hours to travel that distance.

Having Lew with us made planning much easier – the Otago Rail Trail is effectively a point-to-point ride, and we didn’t really want to have to go out and back. Lew was able to drop us off at Omakau, and we could spend the day riding back to Ranfurly. On the second day on the Rail Trail we were able to ride out from Ranfurly, and meet Lew at Hyde.

The trail itself is an interesting mix. It’s a mainly gravel trail, following an old railway line. This means the trail is quite flat, but it also means there’s a few old bridges and tunnels where the line passes through gorges. This is very nice, but the flip side is that sometimes the trail is very long, straight, flat and…dull. It’s definitely still a trip worth doing, but just be aware that it’s not ALWAYS amazing biking and scenery. Overall highly recommended, particularly for those who haven’t done much cycling.

Anna arriving at Ranfurly - click for larger
Anna arriving at Ranfurly – click for larger
More bridges - click for larger
More bridges – click for larger
Looking back over the valley - click for larger
Looking back over the valley – click for larger
Rail Bridge - click for larger
Rail Bridge – click for larger
Anna on Otago Trail - click for larger
Anna on Otago Trail – click for larger
Heading down the trail - click for larger
Heading down the trail – click for larger
Wedderburn - click for larger
Wedderburn – click for larger

We did have one break-down – our only mechanical issue of the whole trip. I was riding along when I had a blow-out, with all the air quickly rushing out of my rear tyre. Looking at the wheel, I saw a spoke nipple had broken off. I assumed it had broken off and driven up into the tube, but it turned out that I had a separate gash in my tyre. At least it was a pleasant spot to stop and make some repairs.

Trail Repairs - click for larger
Trail Repairs – click for larger

Replaced the tube, couldn’t fix the spoke on the trail, so just rode gingerly down to our meeting point – luckily we only had a few kilometres to go!

Of course, it wasn’t just about the cycling:

Off to the Milk Bar - click for larger
Off to the Milk Bar – click for larger
Old-school Cyclists in Ranfurly - click for larger
Old-school Cyclists in Ranfurly – click for larger
Beer at the Vulcan - click for larger
Beer at the Vulcan – click for larger
Wooden Car Bridge - click for larger
Wooden Car Bridge – click for larger

We were in Ranfurly for New Years Eve, and were asking at the bar what might be happening that night. “Oh hopefully it will all be over by 10:30.” We went over to Naseby for a drink, to see what was happening there – it was a little busier, but if you really wanted a big party, heading over to Rhythm & Alps near Wanaka was probably a better option. No matter, none of us were into a big night out.

You might also be wondering what Lew was doing while we were out riding. While he did get out and about, sometimes he just took advantage of the peace and quiet:

Waiting for cyclists to return - click for larger
Waiting for cyclists to return – click for larger
Categories
Bike Touring

The West Coast Wilderness Trail

The most anticipated ride of our summer trip was the West Coast Wilderness Trail. The trail runs from Greymouth to Ross along the West Coast of South Island of New Zealand. It only officially “opened” in late 2013, but it still has parts under construction, and some areas with alternative routes in place. For practical purposes, it’s open right now from Greymouth to Hokitika, and our plan was to ride that section.

West Coast Trail - Click for Map View
West Coast Trail – Click for Map View

Our plan was to spend two days riding on the trail – the first leg would be from Greymouth to Kumara, and then the following day from Kumara as far as we could go. Luckily we had our support crew (Lew) with us, so we could get dropped off at one point, and then picked up somewhere else. This dramatically simplifies the riding. For those without support crew, I’m sure that shuttle services are available – it’s worth spending a bit on this, and not having to do “out and back” rides, or trying to make it into a loop.

The trail promises:

“This fabulous cycling adventure guarantees an outstanding landscape ride through dense rainforest, past glacial rivers and lakes and through wetlands, all the way from the snow-capped mountains of the Southern Alps to the ocean.”

Greymouth to Kumara

We were driving down from Nelson, so arrived in Greymouth in mid-afternoon, for the first leg. We found a park in town, and started getting organised. Now where exactly does the trail start? Oh right. We managed to park RIGHT NEXT to the official start point! Nice parking there. Gear up, say goodbye to Lew, and plan to meet up again in a couple of hours in Kumara. It’s around 35km from Greymouth to Kumara, and it’s all flat. We wind our way out past the small port, and settle onto a mostly gravel trail that runs parallel to the shoreline. This means no traffic, but at times it does make for slightly dull riding. But it’s all very easy going.

Greymouth Trail Start - click for larger
Greymouth Trail Start – click for larger

At times the trail moves closer to the road, but it’s all traffic-free, until we get to this bridge:

Combination Rail & Road Bridge - click for larger
Combination Rail & Road Bridge – click for larger

Yes, that’s right folks. This is the main highway down the West Coast, and it has a one-lane bridge, that also has a railway line running down the middle of it. Currently the bike trail also goes across this bridge. It makes for an entertaining crossing – luckily there’s some friendly drivers around, and they put us in front of them, and shield us somewhat from the other traffic. Phew. It looks like they’re building a “clip on” lane for pedestrians/cyclists – the sooner it goes up the better. Later we spoke to a couple who were carrying their young children with them. Not only did they have to negotiate the cars, they’d also had the misfortune to arrive exactly when the one train that day came through.

Up until this point, the trail was reasonably well-signposted. But after the railway bridge, the signs seemed to stop. The only option was to follow the main road until Kumara Junction, then turn off and follow the road to Kumara. Hunting around online seemed to give some contradictory answers – some sites said the trail went via the old Kumara Tramway, others showed a road alternative. We ended up following the road, which had no shoulder, and feeling somewhat miffed, like we were missing out. We could see a couple of spots where the trail seemed to be built, but it was deliberately fenced off. I was annoyed about it, and worried I’d missed some signposts. But later I spoke with other cyclists, and found out that it was the only option available at present. It will be finished off soon hopefully.

We had a quick look around in Kumara, a historic gold-mining town. The Theatre Royal Hotel has had a massive amount of money spent on it, and looks to be well set up for the hoped-for influx of cashed-up bicycle tourists. It looks like a great place to have a beer, but I don’t think I could afford to stay there. Out of our budget. Instead, Lew drove us through to Hokitika, where we were staying.

Hokitika was packed with people, and cars with bikes on board. It seemed that we weren’t the only ones who decided to ride the new trails, and I’m not sure that the locals were ready for it. Almost every bed in town was taken, and we were lucky to get into the local pizzeria – they had to close the doors at 7:30pm because they’d run out of food!

Kumara to Milltown

The following day Lew dropped us off back at Kumara, for what turned out to be the best single day of riding for the whole trip. It starts out gently enough, with a mix of single track and gravel roads, before things get a bit more interesting with a diversion through an old gold-mining area.

Gold Pits - click for larger
Gold Pits – click for larger

But then you start working your way around TrustPower‘s Kumara/Dillmans Hydro scheme. Now things step up a gear as you look out over mirror-like lakes, with snow-capped mountains in the background. You start thinking “This is what I signed up for!”…but push on. You go deeper and deeper into the country, and suddenly you’re feeling quite isolated. Bush all around you, steep mountains, very little sign of human habitation.

West Coast River - click for larger
West Coast River – click for larger
Feet Up  - click for larger
Feet Up – click for larger
Click for Larger
Click for Larger
West Coast Trail - click for larger
West Coast Trail – click for larger

Later in the day the trails go through more bush, and you hit glorious switchbacks, rolling on and on downhill, with the odd scary swingbridge:

Bridge 3 - click for larger
Bridge 3 – click for larger
Bridge 2 - click for larger
Bridge 2 – click for larger
Swingbridge 1 - click for larger
Swingbridge 1 – click for larger

Racing down through the bush, and suddenly you pop out at “Cowboy Paradise.” Huh? This is a rather odd place – it’s set up like a one-street cowboy town, where you can pretend to be a cowboy, and start shooting things. There’s a bar, and the accommodation should be ready by now. But when we were passing through, the main saloon was being completely rebuilt, with huge piles of timber sitting around. No matter, the bar was open, and we were ready for a drink. A very relaxed sort of affair, you drink what you like, then at the end the total gets totted up, and the cash is just strewn across the bar. Bring cash, I’m not sure if Eftpos was available. Absolutely sensational views of a Arahura valley, where my wife’s grandfather ran a huge farm:

Cowboy Paradise Saloon -  - click for larger
Cowboy Paradise Saloon – – click for larger
View from Saloon - click for larger
View from Saloon – click for larger
Arahura Valley - click for larger
Arahura Valley – click for larger

From here we went back into the bush for more nice trails, before glorious switchbacks down through open fields:

Anna - click for larger
Anna – click for larger
Valley Trail - click for larger
Valley Trail – click for larger

We then had a bit of a grind along a gravel road down a glorious river valley, before being picked up by Lew. Fit riders who start early in the day could make it through to Hokitika, but we were happy to be picked up.

Overall Impressions: Do It

I highly recommend this ride – it was an amazing view of this country, seen from a very different angle. Stunning scenery, a feeling of isolation, and riding surfaces & gradients that were achievable to most. There weren’t many riders out there younger than us. This will be a fantastic ride when it is completed, and will become a major attraction in the area, providing for much more sustained income than the Wild Foods festival.

One local we were chatting to had been involved in much of the planning and preparation for this trail. The long-term plan is to extend it from Karamea all the way to Haast, almost entirely off-road. This would probably be 10 years away, but if they can achieve that, this will become one of the greatest bike trails in the world.

A Note on Hokitika

My wife still has some relatives in Hokitika, and we had a nice time meeting some of them. It is a somewhat isolated town, and it’s not very large. One particular comment struck me when we were there, chatting to the locals:

“Sure, of course I remember when XXXX died, what was it, at least 10 years ago? He was a good sort. But as I said, I’m still fairly new to the area”

I guess it’s a bit like that.

Anna - click for larger
Anna – click for larger
Categories
Bike Touring

Nelson Biking

New Zealand has been building many kilometres of bike trails over the last few years, and some of them look pretty spectacular. So rather than travel to an exotic foreign destination, we decided to stay in New Zealand this summer, and spend our holidays checking out some of the new trails.

I had originally wanted to do a full bike tour, carrying all our luggage, but the logistics of that were proving difficult. My normal travel style on the bike is to have a rough idea of direction, and then each day go as far as I like, stopping wherever is convenient. But this is tricky to do around Christmas/New Years in provincial New Zealand, as places tend to get booked out.

Instead we took a different approach – put the mountain bikes on the car, head down to the South Island, then spend three weeks travelling around, stopping in towns for a few days, and exploring the bike trails in that area. Using mountain bikes gave us complete flexibility to tackle any sort of trail surface – from fast downhill trails to gentle family-friendly rail trails.

On the Road to Wellington

Samson got dropped off at rural farmstay retreat (i.e. my brother’s kiwifruit orchard), then we started the long drive down to Wellington, to catch the ferry across to the South Island. On the way, we took the Akatarawa Road from Waikanae to the Upper Hutt. This is an amazingly beautiful drive, but I hope that tourists don’t get directed down here by their GPS – this is a VERY narrow, twisty road. It’s a bit stressful constantly going around blind corners on a road that is only a bit wider than a single car.

We then had a short ride on the Rail Trail part of the Rimutaka Cycle Trail. I wish we could have spent more time on this trail, but we had to get down to the wharf to check in.

Heading into the tunnels - click for larger
Heading into the tunnels – click for larger
Akatarawa Road - click for larger
Akatarawa Road – click for larger

Nelson – Mountain Biking Mecca

Our plan was to do a rough anti-clockwise loop around the South Island, with our first main stop in Nelson. I have family here, so we could spend Christmas with them. On the way from Picton to Nelson we stopped near Tennyson Inlet for a little warmup on quiet roads and bush tracks. Amazing views, lots of isolated places, but pretty tough going slogging uphill in the heat.

Hot & dry - click for larger
Hot & dry – click for larger
Worlds End? - click for larger
Worlds End? – click for larger
Trail obstacles - click for larger
Trail obstacles – click for larger

The amazing thing about Nelson is that you can ride out your front door, ride through a few city blocks, and then you’re suddenly on fantastic mountain bike trails. My brother-in-law had been a fantastic help with map and suggested route around the Codgers Mountain Bike Park. We were having a great time, but really starting to sweat, and feel the steepness of the slopes…only to be somewhat embarrassed to find a couple of gentlemen at least 30 years older than us had already made it up the top…

Nelson - view from the top  - click for larger
Nelson – view from the top – click for larger
Firball Trail - click for larger
Firball Trail – click for larger

Another day we went out with Dave up into the Sharlands Creek area – a long slog up a gravel road, followed by a bit of bush-bashing to find the trail, and then the downhill single track just seemed to keep on rolling. This was a lot of fun, and I’m glad I was on the bike – not running along beside us like Simba!

Taking our bikes for a walk - click for larger
Taking our bikes for a walk – click for larger

The Great Taste Trail – Nelson to Mapua

Nelson isn’t just mountain biking though – they already have a large network of bike paths around the city, and now they’re adding a new touring route around the region. We checked out a part of the “Great Taste Trail“, which will form a 3-4 day loop out from Nelson. We rode from Central Nelson to Mapua, via Richmond and Rabbit Island.

This was a nice day out, but we were getting a bit tired by the end. Breaking it up with Mapua at lunch was very nice, but it was a long day out – it’s just a bit too long for families with small children, who should only plan on tackling small parts of it. Special mention to the ferry operator – I thought I had completely messed up our timing, and we were going to have to wait, but nope – the ferry was doing a few extra runs, and pulled in just as we arrived.

Mapua - click for larger
Mapua – click for larger

You’ve got two options going from Nelson to Richmond – you can either go more inland, via an old railway line, or you can go along the coast. It might sound odd, but I actually preferred the inland route on the old railway line – it was very peaceful, whereas the coastal route is quite close to a busy road. It’s still a bike lane, but it can be very noisy, and you’re a bit exposed if it’s windy.

Categories
Uncategorized

Site changes coming

You may noticed the new headline – this site is now for northlandboy and his girl. You can now reach the site via northlandboyandhisgirl.com. Links to northlandboy.com will still work.

That’s because it’s no longer appropriate for the site to just be about Lindsay, as Anna is now at least 50% of his life.

Expect to see posts from Anna coming up, and more posts on joint activities. The theme will also get an overhaul in the next month or two – it’s desperately in need of it!

Lindsay is currently working on the look and feel of a new site, that will be dedicated to his professional technical writing. This will be much better than trying to mix life + travel with a deeper explanation of TCL scripting in IMC. Details to be made public soon.

Categories
Uncategorized

Hearing Aids Cases Review

Whenever you buy hearing aids, they almost always come with a small plastic case. As I’ve been trying different hearing aids over the last couple of months, I’ve ended up with a reasonable collection of hearing aids cases, from different manufacturers. These have a range of features. Sometimes it’s a bit unclear how the designers expect you to use the cases, other times they’ve put a bit of thought into it. Below I’ve rated each of the cases I’ve received, along with a few notes on each.

I would use these cases whenever I need to put my hearing aids somewhere safe, possibly for transport – e.g. I might put them in my bag while swimming, or maybe while I’m riding my bike. Overnight I’ll generally store them in a drying kit, but other times they’ll be put in the case. The case should be able to safely store the aids, and ideally it will have a compartment for carrying useful accessories – spare batteries, cleaning tools, that sort of thing.

Here’s the collection I’ve amassed so far:

Full range of hearing aid cases - iPhone 4S on left for scale
Full range of hearing aid cases – iPhone 4S on left for scale

Let’s go through them one by one, in the order I’ve picked them up. First up is the small Widex case I got around 1999:

Small Widex Case Open
Small Widex Case Open
Small Widex Case Closed
Small Widex Case Closed

I like the relatively small size of this case, and the soft interior lid, which gives the aids some protection. Easy to put in the pocket. No place for spare batteries or tools though. Overall rating: Good

Next up is the case I received with my second set of Widex aids, around 2006-2007:

Large Widex Case Open
Large Widex Case Open
Large Widex Case Closed
Large Widex Case Closed

This is my current go-to case. It is bigger than the previous case, but it’s still small enough to put in a man’s pocket, if required. It’s got the hard outside, with softer inside that I like. It’s also got a little storage space to put spare batteries and tools. On the inside of the lid, you can see the pack of spare wax guard filters. It’s a nice touch being able to slot those in there. The designers have clearly put some thought into how people use these. Overall rating: Excellent.

Now, let’s move on to some of the cases I’ve received as part of my recent testing. Phonak really go to town, starting with a large soft case, which contains a smaller soft case, and a smaller hard-sided case. It has room for all manuals, tools, everything. Unfortunately this overall case is pretty large, as you can see in the earlier photo.

Phonak Large Carry Case
Phonak Large Carry Case

I’ve ended up with two of these, which is over-kill really. I don’t know who needs this great big case. I ended up with two of the smaller hard-sided cases from Phonak too, one slightly large, but both pretty small:

Smallest Phonak Hard-Sided Case
Smallest Phonak Hard-Sided Case
Slightly Larger Phonak Case
Slightly Larger Phonak Case

These are both very nice little cases. Nice and small, but still have some protection for the aids, and they have storage space for tools and batteries. Well thought out. Phonak also gave me this soft-sided case, but I have no idea where to use it, as it really offers no protection:

Phonak Small Soft-sided Case
Phonak Small Soft-sided Case

Overall, Phonak seems to be trying to cater to everyone. But they end up shipping a bunch of stuff that no-one really needs. Ultimately, I would probably only use the smallest plastic case, and everything else could be thrown away. Overall rating: Very good (would have been excellent, but they ship too much extra stuff)

Finally, the Oticon case that came with the most recent pair of aids I’m trying:

Oticon Hard Case
Oticon Hard Case

I’m not really impressed by this case. It’s a nice looking slide out case – not much chance of it accidentally flipping open, as the Widex cases are prone to do. But inside, it’s all hard edges, and there’s nowhere to put spare bits and pieces. It’s quite a large interior space, and they could have had something there, but they just didn’t seem to bother. Overall rating: Below Average

I’m undecided on keeping my Oticon aids. Possibly I’ll return them, and try the new Widex Dream aids in a few months, when they become available. I wonder what 2013 will bring for new case design from Widex?

Categories
Uncategorized

Hearing is Believing

I’ve been using Widex Inteo hearing aids for about six years now. One CIC (Completely In Canal) model, and one ITE (In The Ear) size. Prior to that, I had another set of earlier Widex digital hearing aids for around 7 years.

Hearing aids have an expected lifetime of somewhere around 5-7 years, perhaps a little shorter for models like mine that live inside the ear. I’m lucky that I don’t seem to get much wax in my ears, so I’ve been lucky that mine last reasonably well. I’ve still had to get them serviced periodically, and I did once have them fail in Turkey (but luckily I was able to get them repaired!).

Technology moves on, and hearing declines as we age. At a minimum, I need my current aids serviced, tested, and possibly reprogrammed for my changing hearing. But since my current aids are still working, I’m not in a hurry to get new ones. Instead, it’s a good chance to look at my options, including a changing to a different manufacturer.

To start off, I had a full hearing test conducted by Dilworth. This went beyond the usual “tell me when you hear the beeps” test, and included comprehension tests in noise, and electronic measurements. Apparently not only is my hearing worse in my left ear, but my eardrum responds differently. If only there was a simple operation that could fix hearing. Not likely in my lifetime though.

Once we had the results, the audiologist and I had a look at what my options are. I wanted to stay with CIC or ITE style aids, which is a bit tricky, since my left ear is marginal or outside the limits for most manufacturers, in that style. I like CIC because they are good with the wind, I can put headphones over them if I need to, and they’re reasonably discreet. I’m getting older now though, so I’m not quite so fussed on that last point.

Depending on development cycles, vendors jockey for position for “best” hearing aids. Even then, what’s best for one person will be terrible for someone else. This is in part due to different philosophies of different manufacturers, as to how best to help with hearing loss. If you haven’t dealt with this sort of thing, you may think that it’s simply a matter of raising the volume. Turns out that it’s far more complex than that.

Firstly, different people have different patterns to their loss. For me, my low range is poor, my mid frequency is worse, but going up it gets quite a bit better. This is quite different to typical age-related loss, where the high frequencies are affected. If you raise the volume across all frequencies, you will distort speech as that person perceives it. Apparently increasing levels in one frequency range can drown out perception in other ranges. This can lead to the situation where everything seems very loud, but you still can’t understand what people are saying. All you get is a headache. Not much fun.

Secondly, different environments require different sorts of help. In a quiet environment, you probably do want to hear the page turning. But if you’re in a noisy environment, you really want to be able to focus on the conversation going on right in front of you. The last thing you want is every conversation in the room coming through at full level. So manufacturers work hard to try and detect the environment they’re in, and adapt. Some aids have programs that the user can select, but many now are automatic. These will try and work out what’s going on, and how best to respond. One of the things they will do is to compress loud sounds, to ensure they don’t cause discomfort to the user.

Thirdly, some manufacturers have a philosophy of “speech comprehension is more important than anything else.” In some ways this is true, but this can make the adaptation phase harder for those using aids for the first time, or changing manufacturers. Others aim for more natural sound.

The other thing that plays into this is the user – you get used to a certain sort of “style” and changing can be very jarring. If you expect to hear a car door slamming sound like, well, a car door slamming, it’s very disconcerting when it sounds like a short clap. It’s also very odd to hear your voice changing. Takes a while to get used to.

Anyway, we decided that Phonak Virto aids would be the best for me to try. The specs said I could get two CIC aids, so we ordered those. Turned out the specs were a touch optimistic. Even with my good-sized ear canals, with the gain needed on the left ear, they just couldn’t make a shell that worked. In the end, we got a slightly larger aid than originally anticipated, but it wasn’t too bad. The initial moulding of the right ear was also a problem, with it being very long, and pushing on my ear drum. Very painful. Managed to get that one shortened though, and all was good.

The Phonak style is very different to the Widex style. Much more focused on speech, and to my ears at least, somewhat “tinny.” Huge amounts of echo too, until we got them programmed right. That’s the other thing with modern hearing aids – you hook them up to a computer, while they’re in your ears, and you have a million options you can change on them. You can also insert tiny tubes alongside the aids while they’re in your ear, then a machine plays a sentence to you, and shows what the aids are doing, along with recommendations on improving the settings. The only problem with having a million options is of course trying to work out which ones you actually need to change. Also tough when you’re doing it at the clinic, as there’s not that many different environments you can be exposed to.

The Phonak aids were strange to get used to, but I decided to only wear them for several weeks, and not fall back to my old aids. Turned out to be pretty tough going. I realised I was missing a lot of conversation, and my wife saw me missing more that I didn’t even notice. But it was in noisy environments that they were toughest. Shopping malls or parties were very tough, where they just gave me a wall of noise. In that situation, you tend to shut down, as it’s the only way to cope.

We tried making adjustments to them, but ultimately they just weren’t going to work for me. Maybe someone else, but they weren’t an improvement on what I had – they were worse – so there was no point paying the $7,100NZD. So back to the audiologist.

Now I’m trying some Oticon Acto aids. I had to go for an ITC Power style for my left ear, to get the gain I needed, but I’ve got CIC for the right ear. I’d rather have them the same, purely so they use the same battery, but hey, I’m used to this setup now. Initial fitting went well, and the tests on the machine show that we’re able to get these ones to pretty much exactly where the machine thinks they should be.

It’s hard to say what they’re going to be like – my brain is still adjusting to the changed sounds. They feel like they might be a little worse right now, but I need to give it a few more days before we’ll know. Hopefully these work out, otherwise I’m going to go back to my trusty Widex Inteo aids. They’re being serviced right now. Widex tells me that they’ve got new stuff coming out soon. So if I do go back to the Widex aids, then I’ll stick with them for a bit longer, and maybe in 12-24 months I’ll try again.

I’ll report back in a couple of weeks with progress.